Taian Xinbaodi Experimental Equipment Co., Ltd
Taian Xinbaodi Experimental Equipment Co., Ltd
Add to Cart
Standard Injector Specification
|
SpecificationType |
Low-inertia Standard Injector |
Pintle Standard Injector |
Orfice Standard Injector |
|
Model |
ISO7440B64-20.7 |
ISO7440A14-17.2 |
ISO7440A54-17.2 |
|
Opening Pressure |
20.7+0.3Mpa |
7.2+0.3Mpa |
17.2+0.3Mpa |
|
Orifice Diameter |
0.40.50.60.70.8 |
No |
0.40.50.60.70.8 |
|
Installation Length |
55mm |
||
|
Outer Dimension |
218×115×48mm |
193×140×40mm |
231×144×40mm |
|
Suitable Pump |
PWPBPNPW2000P7100BQetc |
IIIBAetc |
AAWADIetc |
|
Notes |
1Check and adjust opening pressure regularly; 2If fuel delivery quantity changes dramaticallyin most cases caused by the orifice blocked by scrap iron ; 3 If injectors are assembled after being cleaned or purged ,the specific composition of nozzle, orifice,and injection line can not be changed casually. |
||